The internet has become the need of the hour. One can simply not function without it. The reason? One word; connectivity! It is because of the internet that the whole world is within your reach. You can easily connect with your loved ones no matter how far they are. Apart from this, you can easily access all kinds of information, allowing you to stay updated at all times. However, to make use of the internet, you will need to install Wi-Fi. But if you don’t know how to do that then this article is just for you! Read on to find out how you can easily create your own home wireless network.
Things You Need
Table of Contents
Before discussing the steps required to set up your Wi-Fi, let’s take a look at the things you will require.
- Router
You will first need to invest in a good router. There are some factors that you should consider before selecting the best device for you. These include transfer speed, distance, security, and interference. After you have bought the router but experiencing some problem then it is always a good idea to contact Spectrum customer service temple tx for guidance.
- Modem
Selecting the right modem is just as important as choosing a router. Your modem is the device that will convert the data gathered into digital signals before it transmits to the router. It will then transfer the information to your wireless device, allowing you to use the internet seamlessly.
- Ethernet Cable
Why ethernet cable? Well, it will allow you to resolve weak Wi-Fi signal problems. Plus, it will enable other devices to connect with the internet.
How to Set Up Wi-Fi
Now that you know the things needed, let’s find out how to set up Wi-Fi at home.
#1. Finding the Ideal Location for Your Router
For your wireless router to work efficiently, you will need to find the optimal place in your home. You will have to make sure that whichever spot you find, it has to be free from obstacles. If not, then it might cause wireless interference. Always remember to never place your router close to a wall, window, or microwave.
#2. Switch the Modem Off
Next, if your modem is switched on then you have to turn it off. Only then you will be able to connect your router to the modem.
#3. Attach Your Router with the Modem
You will now need to connect the router to the modem. For this, take the ethernet cable which you will be provided with the router and plug it into the WAN port of the router. Now, hold the other end of the ethernet cable and plug it in the modem. Viola! You have successfully connected your router with the modem.
#4. Connect Your Laptop/Computer to the Router
It is time to connect your laptop/computer to the router. To do this, take the other ethernet cable and plug one end of it into the router LAN port. Then, take the other end of the cable and plug it into the ethernet port of either a laptop or a computer. Please note that you are only connecting this wiring temporarily. You can remove it once the network is connected.
#5. Turn on Your Modem, Router, and Computer
Once this setup is done, you will need to switch on your devices. However, keep in mind that you have to turn on the modem, router, and computer in that order to maintain their connection.
#6. Open the Router’s Management Web Page
After you have turned on the devices, open the browser and type the IP address of the router to open its management web page. This information will be given in the router documentation.
#7. Change the Default Administrator Credentials and Add WPA 2 Security
Next, change the default administrator credentials of the router. You can do this in the Administration tab. There, you will also find the wireless network information section where you can change the choose a name for your wireless network. After that, head to the wireless security section and select WPA 2 security as it is more secure than WEP.
#8. Install the Wireless Adaptor and Connect to the Network
Once you have saved the configuration settings on the router, remove the cable that you used to connect your router with the PC. Then connect the USB to the computer to install the wireless adaptor. Now, search for the network that you just set up and connect to it. When I installed Wi-Fi at home, the first thing I did was to search for the best internet speeds in my area. This helped me get the right internet package, making my online experience a lot of fun!
There you have it! These 8 steps will help you to set up a wireless network connection in your home easily. Although, the internet has become much of a necessity in today’s time. However, it has increased some online risks as well. So, surf safely and responsibly!
